Combining photocatalytic process and biological treatment for Reactive Green 12 degradation: optimization,...

In this study, we show that the combination of a photocatalytic process (as a pretreatment step) combined with the conventional biological treatment of wastewaters can improve the process and achieve satisfactory efficiency. In this context, Reactive Green 12 (RG-12) solutions were photocatalytically pretreated using TiO₂-impregnated polyester as supported catalyst under UV light in batch reactor. Photocatalysis as pretreatment (during 4 and 8 h of irradiation) was combined with 7 days of aerobic biological treatment using activated sludge. As first assays, respiratory tests revealed that the removal of RG-12 was improved by 5.4% and 11.7% for the solutions that were irradiated for 4 and 8 h in the presence of TiO₂, respectively. However, 34.5% and 19% of dye solution was discolored after 7 days of biological treatment for the pretreated solutions during 4 and 8 h of UV light exposure, respectively. The discoloration efficiency obtained by the combined processes achieved 59.6% and 74.9% for the samples under photocatalysis during 4 and 8 h, respectively. A significant decrease in chemical oxygen demand (COD) of about 74.9% was achieved after photocatalysis/biodegradation processes. In addition, a decrease in the phytotoxicity was obtained as followed by the germination index (GI) values of cress seeds that increased from 46.2 to 88.7% after 8 h of photocatalysis and then to 92.8% after further 7 days of biological treatment.