Molecular dynamic simulation of performance of modified BAMO/AMMO copolymers and their effects on mechanical...

Based on molecular dynamic method, densities, mechanical behavior and mechanical performance of P(BAMO/ AMMO) (Polymer 1) and two novel modified P(BAMO/AMMO) (Polymer 2: containing amino group, Polymer 3: containing nitro group), and their effects on mechanical properties of four energetic materials are investigated, the main results are as follow: Polymer 2 (1.235 g/cm³, 240 ± 5 K) and Polymer 3: 1.281 g/cm³, 181 ± 3 K) possess higher densities and lower glass transition temperatures than Polymer 1 (1.229 g/cm³, 247 ± 4 K). The modification makes Polymer 1 difficult to expand, improves its mechanical properties, but has few effect on its diffusion coefficient at same temperature and state. In addition, three binders are compatible with TNT, HMX and CL-20, and may react with DNTF. All polymers particularly improve rigidity of four energetic materials, and enhance their ductility except Polymer 2 on TNT. The ability of Polymer 2 and Polymer 3 improving rigidity (except Polymer 3 on HMX) and ductility of TNT and HMX is inferior to that of Polymer 1, but it is contrary for CL-20 and DNTF (except Polymer 2 on rigidity of DNTF). Moreover, Polymer 2-based interfacial crystals exhibit higher rigidity than Polymer 3-based interfacial crystals.