Soliton mode-locked pulse generation with a bulk structured MXene Ti₃AlC₂ deposited onto a D-shaped fiber

We propose a bulk structured MXene, Ti₃AlC₂ deposited onto D-shaped fiber for soliton generation in an erbium-doped fiber laser (EDFL) cavity. Our saturable absorber (SA) device, based on MAX phase, was prepared by using stirring and ultrasonic vibration, which offer easier sample preparation compared with its 2D counterparts. By means of the polishing wheel technique, we fabricated a D-shaped fiber with a controlled polishing depth and incorporated the MAX phase Ti₃AlC₂ solution onto its polishing region. We obtained a mode-locked soliton pulse with the proposed MAX phase D-shaped (MAX-DS) SA in EDFL cavity. The pulse width, repetition rate, and central wavelength of the pulse train are 2.21 ps, 1.89 MHz, and 1557.63 nm, respectively. The polarization-insensitive EDFL cavity initiated a soliton operation with superior stability as the pump power tuned from 21 to 131 mW; further, the ML laser exhibits an average power of 15.3 mW, peak power of 3.8 kW, and pump efficiency of 12.5%. The MAX-DS SA incorporated inside the EDFL reveals efficient output performance, with a pulse energy of 8.14 nJ, the highest ever reported, to our best knowledge, among D-shaped fiber-based SA.