Mechanical strength improvement of chitosan/hydroxyapatite scaffolds by coating and cross-linking

Coating and cross-linking have been widely used to improve the properties of materials in tissue engineering. A chitosan/hydroxyapatite (CS/HA) comby scaffold with high porosity was prepared via a 3D printed pore-forming mold. The scaffold was then treated with gelatin (Gel) coating and was cross-linked by glutaraldehyde (GA) in order to improve the mechanical strength. The materials were characterized by infrared spectroscopy (IR) and X-ray diffraction (XRD). The structure of the scaffolds was observed by Scanning Electron Microscopy (SEM). Compression tests were carried out to evaluate the strength of the scaffolds. The behaviors and responses of preosteoblast cells on the scaffolds were studied as well. The results showed that gelatin coating and cross-linking significantly enhanced the mechanical strength of the porous scaffolds. Cell culture experiment indicated that the scaffold had good cytocompatibility. The combined application of 3DP structure construction and biopolymer coating/cross-linking would offer some new ideas in fabrication of porous scaffolds with enhanced strength and good biocompatibility for tissue engineering.