Light-deformable dynamic surface fabricated by ink-jet printing

Dynamic surfaces which can change their topography with external stimuli have wide application prospects. Liquid crystal network (LCN) is an ideal material for making dynamic surfaces, but traditional methods for LCN dynamic surface manufacturing are difficult to scale up, which limits its applications. This research proposes a new method to fabricate a responsive surface using ink-jet printing technology. Using a liquid crystal monomer mixture as the ink, we printed arrays of droplets onto a glass substrate with a homeotropic alignment layer and polymerized the droplets into deformable LCN hemispheres. An azobenzene diacrylate was copolymerized into the hemispheres to make them photo-responsive to UV light. Because the ink-jet printing method can potentially be used to print countless hemispheres on a large area substrate, large area dynamic surfaces consisting of a multitude of separate dynamic structures can be manufactured. Since the deformation of the entire surface is a periodic repetition of the deformation of a single hemisphere, we characterized the deformation of individual hemispheres, and found that the optical image of hemispheres between crossed polarizers shows a "maltese cross" texture, and 3D surface profiling shows the top surface depresses into a valley after UV-irradiation. This is caused by an order parameter decrease of the homeotropically aligned LC molecules, which leads to a contraction in the alignment direction. The deformation amplitude can be modulated by UV intensity and temperature. This kind of dynamic surface fabricated by ink-jet printing technology can easily be scaled up and is promising for applications such as adjustable micro-lenses or surface wettability.