Nanopatterned Nafion microelectrode arrays for in vitro cardiac electrophysiology

In this study, we report nanopatterned Nafion microelectrode arrays for in vitro cardiac electrophysiology. With the aim of defining sophisticated Nafion nanostructures with highly ionic conductivity, fabrication parameters such as Nafion concentration and curing temperature were optimized. By increasing curing temperature and Nafion concentration, we were able to control the replication fidelity of Nafion nanopatterns when copied from a PDMS master mold. We also found that cross-sectional morphology and ion current density of nanopatterned Nafion strongly depends on the fabrication parameters. To investigate this dependency, current-voltage analysis was conducted using organic electrochemical transistors (OECT) overlaid with patterned Nafion substrates. Nanopatterned Nafion was found to allow higher ion current densities than unpatterned surfaces. Furthermore, higher curing temperatures were found to render Nafion layers with higher ion/electrical transfer properties. To optimize nanopattern dimensions, electrical current flows, and film uniformity, a final configuration consisting of 5% nanopatterned Nafion cured at 65°C was chosen. Multielectrode arrays (MEAs) were then covered with optimized Nafion nanopatterns and used for electrophysiological analysis of two types of induced pluripotent stem cell-derived cardiomyocytes (iPSCs-CMs). These data highlight the suitability of nanopatterned Nafion, combined with MEAs, for enhancing the cellular environment of iPSC-CMs for use in electrophysiological analysis in vitro.