Related Experiment Video
Updated: Nov 28, 2025

Real-Time Proxy-Control of Re-Parameterized Peripheral Signals using a Close-Loop Interface
Published on: May 8, 2021
Cooperative Output-Feedback Secure Control of Distributed Linear Cyber-Physical Systems Resist Intermittent DoS
Abstract:
This article studies a cooperative output-feedback secure control problem for distributed cyber-physical systems over an unreliable communication interaction, which is to achieve coordination tracking in the presence of intermittent denial-of-service (DoS) attacks. Under the switching communication network environment, first, a distributed secure control method for each subsystem is proposed via neighborhood information, which includes the local state estimator and cooperative resilient controller. Second, based on the topology-dependent Lyapunov function approach, the design conditions of secure control protocol are derived such that cooperative tracking errors are uniformly ultimately bounded. Interestingly, by exploiting the topology-allocation-dependent average dwell-time (TADADT) technique, the stability analysis of closed-loop error dynamics is presented, and the proposed coordination design conditions can relax time constraints on interaction topology switching. Finally, two numerical examples are presented to demonstrate the effectiveness of the theoretical results.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Control Systems
At the heart...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...

