Single optical sensor to multiple functions: Ratiometric sensing for SO₃^2- and dual signal determination for copper...

Polymer dots possess superior emissive features, but most of them give rise to luminescence bands in the blue region. In addition, blue or green emissions have difficulty in penetrating tissue deeply. Therefore, long wavelength emissive signals are welcome for the development and application of polymeric dots towards sensing and bio-analysis. Herein, the color-tunable fluorescence polymer nanoparticles (F-PNPs) have been synthesized via one-step strategy based on the employment of hydroquinone and polyethyleneimine as precursors at low temperature. Moreover, its emission peak can be shifted from 523 nm to 612 nm by varying the excitation wavelength in the range of 380 nm to 480 nm. In view of sensing assessment, F-PNPs enable the quantitative determination of trace amount of SO₃^2- and Cu²⁺. In the presence of SO₃^2-, the polymer dots exhibit ratiometric fluorescence signals in deionized water and the color change from green to blue has been clearly observed by naked eyes (detection limit = 59 nM). In addition, two emission bands at 545 nm (green) and 601 nm (red) are observed to be responsive to the exposure of Cu²⁺. The entire dual sensing system for the detection of Cu²⁺ will be more accurate and reliable. The evaluation results reveal their optical signals are improved linearly due to the addition of Cu²⁺ at increasing concentrations and the detection limits are calculated to be 76 nM (green) and 41 nM (red), respectively. Such polymeric network will provide a new dynamic platform for sensing purposes in biomedicine study, environmental protection, and food safety.