Effect of the presence of orthodontic brackets on intraoral scans

The need for intraoral scanning in the presence of brackets has increased for monitoring tooth movement during orthodontic treatment. The purpose of this study was to evaluate the effect of orthodontic brackets bonded to tooth surfaces on intraoral scans.

Intraoral scans were performed in 30 patients using both iTero and Trios scanners before and after bonding of the brackets. The two sets of intraoral scans of each patient and intraoral scans with and without brackets were superimposed using a best-fit algorithm, and three-dimensional (3D) surface analysis was performed. In each superimposition, discrepancies in the 3D axes and arch-width measurements in the incisor and molar regions were compared. In addition, the range of distortion around the brackets was evaluated on the cross sections of each superimposition.

The overall discrepancies between the intraoral scans with and without brackets were within 0.30 mm. The arch-width discrepancies in the molar region were greater than those in the incisor region, but the differences were not statistically significant (P = .972 for iTero; P = .960 for Trios). The cross sections of the superimposed intraoral scans with and without brackets showed that the deviations were within 0.40 mm in the horizontal section and within 0.35 mm in the vertical section around the brackets.

The results of this study indicate that the accuracy of intraoral scans, even in the presence of brackets, is clinically acceptable, and the regions beyond 0.50 mm around the brackets should be used for superimposition on images without brackets.