[Performance and Microbial Characteristics of Ammonium-limited and Nitrite-limited ANAMMOX Systems]

The performance and microbial characteristics of ammonium-limited and nitrite-limited ANAMMOX reactors were studied in two continuously stirred tank reactors. The influent TN concentrations were controlled below 50 mg·L^-1. The hydraulic retention time and water temperature were maintained at 2.0 h and 20℃, respectively. Results showed that though both ANAMMOX reactors demonstrated similar TN removal loading rates[0.45-0.5 kg·(m³·d)^-1] and TN removal efficiencies (around 70%), the ΔNO₃^-/ΔNH₄⁺ ratio of the ammonium-limited ANAMMOX reactor showed a faster upward trend. Batch tests and high-throughput sequencing results indicated that the ammonium-limited ANAMMOX reactor had more significant functional and population heterogeneity than the nitrite-limited ANAMMOX reactor. Candidatus_Brocadia was the predominant ANAMMOX bacteria in both reactors. The relative abundance of Candidatus_Brocadia in large granules (53.9%) was significantly higher than that in flocs (19.1%) under the ammonium-limited conditions, whereas only a small difference in relative abundance of Candidatus_Brocadia was observed between the granules (28.1%) and flocs (21.3%) in the nitrite-limited ANAMMOX reactor. Nitrospira-like NOB were detected in both ANAMMOX reactors, which primarily inhabited flocs, seemingly driven by the availability of oxygen. Moreover, the ammonium-limited (i.e., excess nitrite) conditions seemingly favored the growth of Nitrospira. Building upon these results, a control strategy for optimal operation of the ammonium-limited ANAMMOX reactor was proposed based on selective floc discharge.