Optimization of piezotransducer dimensions for quasicollinear paratellurite AOTF

The method of quasicollinear acousto-optic tunable filters (AOTFs) piezoelectric transducer dimensions optimization is presented. The AOTFs with large interaction length apply the bulk acoustic wave (BAW) reflection from the input optical facet. Optimization is based on spectral approach to simulation of the BAW field in anisotropic media and Raman-Nath equations numerically solved for the inhomogeneous acoustic field. It was found that variation of the transducer dimensions can minimize RF power consumption of the AOTF. Comparison of the optimized transducer dimensions with those commonly used in quasicollinear paratellurite AOTFs showed that it is possible to improve the AOTF energy efficiency in about 2 times. It was shown that acoustic field simulation results obtained for one AOTF geometry can be applied to the other geometries but for equivalent frequency providing the same ultrasound beam ray spectrum width. It was also shown that when choosing the quasicollinear AOTF with reflection geometry, one should not rely only on the AO figure of merit value, since the energy efficiency of such AOTF type will be determined by the product of the AO figure of merit and the AOTF efficiency, which takes into account the change in the acoustic beam width in the reflection process. The results aim at improving the design of AOTFs for ultrashort laser pulse shaping.