Related Experiment Video
Updated: Nov 23, 2025

Advanced Self-Healing Asphalt Reinforced by Graphene Structures: An Atomistic Insight
Published on: May 31, 2022
Feasibility study on recycled vegetable oil waste and recycled polyethylene for the modification of aged asphalt
Xiangqian Ye1, Xiaoling Zou1,2, Fafu Tian1
1School of Civil Engineering, Chongqing Jiaotong University, Chongqing, China.
Abstract:
The application of reclaimed asphalt pavement has been widely encouraged due to its significant economic and environmental benefits. However, it is necessary to add rejuvenators to ensure its performance. Currently, bio-oil-based regenerants have attracted attention owing to their advantages of renewability and cost savings. The purpose of this paper is to study the use of recycled vegetable oil waste (R-oil) and recycled polyethylene particles for the regeneration and modification of aged asphalt. Physical, rheological, and chemical tests were used to figure out their influence on the pavement performance of aged asphalt. According to the physical test indices (penetration, softening point, and ductility), the performance of the rejuvenated asphalt was better than that of virgin asphalt. The workability and low-temperature performance of the rejuvenated asphalt were basically the same as those of virgin asphalt, and its fatigue and high-temperature performance were better. Infrared spectroscopy showed that R-oil diluted the high-polarity sulfoxide base of aged asphalt. Gel permeation chromatography showed that its molecular weight dispersion was better than that of aged asphalt. Therefore, R-oil and polyethylene can improve the pavement performance and chemical properties of aged asphalt.
Related Concept Videos
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists of a...
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Olefin Metathesis Polymerization: Ring-Opening Metathesis Polymerization (ROMP)

