Related Experiment Video
Updated: Nov 22, 2025

Infrared Degenerate Four-wave Mixing with Upconversion Detection for Quantitative Gas Sensing
Published on: March 22, 2019
On-Line Monitoring of Gas-Phase Molecular Iodine Using Raman and Fluorescence Spectroscopy Paired with Chemometric
Heather M Felmy1, Andrew J Clifford1, Adan Schafer Medina1
1Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States.
Abstract:
Molten salt reactors (MSRs) have the potential to safely support green energy goals while meeting baseload energy needs with diverse energy portfolios. While reactor designers have made tremendous strides with these systems, licensing and deployment of these reactors will be aided through the development of new technology such as on-line and remote monitoring tools. Of particular interest is quantifying reactor off-gas species, such as iodine, within off-gas streams to support the design and operational control of off-gas treatment systems. Here, the development of advanced Raman spectroscopy systems for the on-line analysis of gas composition is discussed, focusing on the key control species I2(g). Signal response was explored with two Raman instruments, utilizing 532 and 671 nm excitation sources, as a function of I2(g) pressure and temperature. Also explored is the integration of advanced data analysis methods to enable real-time and highly accurate analysis of complex optical data. Specifically, the application of chemometric modeling is discussed. Raman spectroscopy paired with chemometric analysis is demonstrated to provide a powerful route to analyzing I2(g) composition within the gas phase, which lays the foundation for applications within molten salt reactor off-gas analysis and other significant chemical processes producing iodine species.
More Related Videos
10:14Synthesis and Purification of Iodoaziridines Involving Quantitative Selection of the Optimal Stationary Phase for Chromatography
Published on: May 16, 2014
09:56Real-time Monitoring of Reactions Performed Using Continuous-flow Processing: The Preparation of 3-Acetylcoumarin as an Example
Published on: November 18, 2015
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
IR Spectroscopy: Molecular Vibration Overview
Stretching vibrations are vibrational motions that occur along the bond line, changing the bond length or distance between two bonded atoms. They are further distinguished as symmetric or asymmetric. In symmetric stretching, the...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...