Related Experiment Video
Updated: Nov 21, 2025

Measurement of Quantum Interference in a Silicon Ring Resonator Photon Source
Published on: April 4, 2017
On-chip silicon photonic controllable 2 × 2 four-mode waveguide switch
Cao Dung Truong1, Duy Nguyen Thi Hang2, Hengky Chandrahalim3
1Faculty of Electronics and Computer Engineering, Posts and Telecommunications Institute of Technology, Hanoi, Vietnam. dungtc@ptit.edu.vn.
Abstract:
Multimode optical switch is a key component of mode division multiplexing in modern high-speed optical signal processing. In this paper, we introduce for the first time a novel 2 × 2 multimode switch design and demonstrate in the proof-of-concept. The device composes of four Y-multijunctions and 2 × 2 multimode interference coupler using silicon-on-insulator material with four controllable phase shifters. The shifters operate using thermo-optic effects utilizing Ti heaters enabling simultaneous switching of the optical signal between the output ports on four quasi-transverse electric modes with the electric power consumption is in order of 22.5 mW and the switching time is 5.4 µs. The multimode switch exhibits a low insertion loss and a low crosstalk below - 3 dB and - 19 dB, respectively, in 50 nm bandwidth in the third telecom window from 1525 to 1575 nm. With a compact footprint of 10 µm × 960 µm, this device exhibits a relatively large width tolerance of ± 20 nm and a height tolerance of ± 10 nm. Furthermore, the conceptual principle of the proposed multimode switch can be reconfigurable and scalable in multifunctional on-chip mode-division multiplexing optical interconnects.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Switching of BJT
Cut-off Mode ("Off" State): In this state, both the emitter-base and collector-base junctions are...

