Related Experiment Video
Updated: Nov 19, 2025

Multiplexing Focused Ultrasound Stimulation with Fluorescence Microscopy
Published on: January 7, 2019
Nonlinear crosstalk in broadband multi-channel echosounders
Babak Khodabandeloo1, Egil Ona1, Gavin J Macaulay1
1Ecosystem Acoustics Group, Institute of Marine Research, Bergen, Norway.
Abstract:
Distortion of acoustic wave caused by nonlinear propagation transfers acoustic energy into higher harmonics of the transmitted signal. When operating several broadband echosounders with non-overlapping frequency bands to cover a wide frequency range, higher harmonics generated by one band may interfere with the fundamental band of others. This interference (i.e., crosstalk) can adversely affect the measured backscattered amplitude frequency response and in some circumstances, appears as spurious targets above and/or below the main target in pulse-compressed echograms. The nonlinear propagation of frequency-modulated acoustic waves in a directional beam was modeled and used to assess methods to reduce the deleterious effects of harmonic components in the signal, and was also compared to field experiments using the seabed echo and a metallic target sphere, with good agreement. Two methods are shown to materially reduce crosstalk: (1) reduction in transmit power, which reduces crosstalk amplitude by a larger amount than the associated reduction in transmit power, and (2) selection of a proper Fourier window length in the processing stage. The effect of crosstalk was small (<0.4 dB or 10%) for area backscattering measurements, but could be several dB for target strength measurements at different frequencies, depending on the transmit signals and processing parameters.
Related Concept Videos
Echo
Imagine the sound is reflected back to the ears. Assuming that the source is very close to the human, the difference between hearing the two sounds—the emitted sound and the reflected sound—may be more than the minimum time for perceiving distinct sounds. If this is the case,...
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Interference and Superposition of Waves
Interference occurs in mechanical waves, such as sound waves, waves on a string, and surface water waves. Mechanical waves correspond to the physical displacement of particles. Hence,...
Propagation of Waves
Consider a scenario where a wave propagates from a string of low linear mass density to a string of high linear mass density. In such a case, the reflected wave is out of phase with respect to the incident wave, however the...
¹³C NMR: ¹H–¹³C Decoupling
A broadband decoupling technique is used to simplify these complex, sometimes overlapping, signals. Broadband decoupling relies on a...
Sound Waves: Interference

