Direct Transesterification for Biodiesel Production and Testing the Engine for Performance and Emissions Run on...

In the current research, the biodiesel was prepared from feedstocks of Neem oil and Karanja oil employing a single step direct transesterification method using acid-base catalysts simultaneously. The fuel properties of both Neem and Karanja biodiesel along with different biodiesel-diesel blends were studied and compared. Biodiesel produced from Neem oil was found better in terms of kinematic viscosity, calorific value and cloud point for all its blends with diesel compared to Karanja biodiesel-diesel blends. Experiments were conducted to study the effects of addition of graphene nano particles on fuel properties of biodiesel-diesel blends. The B20 biodiesel-diesel blend was selected, which was blended with graphene nano particles in different proportions (35, 70, 105 ppm) to get different stable and symmetric B20-nano blends. The fuel properties except kinematic viscosity were further improved with higher dosages of nano particles with the biodiesel-diesel blend. The performance and emissions tests were conducted on 4-stroke variable compression ratio diesel engine. Higher concentrated B20-nano blends of Neem (NOME20GO105) and Karanja (KOME20GO105) resulted in 31 and 30.9% of brake thermal efficiency, respectively, compared with diesel of 32.5%. The brake-specific fuel consumption (BSFC) was reduced by 10 and 11% for NOME20GO105 and KOME20GO105, respectively, compared to their respective B20 blends. Similarly, carbon monoxide (CO) was reduced significantly by 27 and 29% for NOME20GO105 and KOME20GO105, respectively.