Stability of Sliding Mode ILC Design for a Class of Nonlinear Systems With Unknown Control Input Delay
Abstract:
This article studied the stability and convergence of a robust iterative learning control (ILC) design for a class of nonlinear systems with unknown control input delay. First, the iterative integral sliding mode (IISM) design was proposed, which comprised iterative actions. The iterative action made the convergence of the tracking error under the ideal sliding mode. Then, a suitable iterative update law was provided for the IISM-based robust ILC controller. The controller had the capability of both minimizing the steady tracking error and suppressing the unrepeatable disturbance. Using the controller, the closed-loop system stability was analyzed, and the stability conditions were given. Consequently, the sliding mode convergence in the iteration domain was proved by a composite energy function (CEF). In addition, by analyzing the influence of affection on the tracking error, several measures were taken to solve the chattering problem of the sliding mode control. Finally, a one-link robotic manipulator and a vertical three-tank system were used to verify the control design. The application simulations validated the performance of the proposed sliding mode iterative learning control (SMILC) design, which achieved the stability of the nonlinear system and overcame the control input time delay.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Second Order systems II
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Control System Problem
When forming a closed-loop system, issues can arise if the poles cross into the unstable region, leading to potential...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...


