The influence of particle size on the application of compression and compaction models for tableting

The physical characteristics of raw materials determine powder compression and compaction performance as relevant in pharmaceutical processes. For instance, the influence of initial particle size on powder compression and the resulting strength of specimen are highly complex and are still not sufficiently understood. Existing studies are often limited to materials with well-defined deformation behaviour, such as purely brittle or ductile. However, the deformation behaviour of active pharmaceutical ingredients (APIs) is often more complex. In this study, the influence of initial particle size on powder compressibility and compactibility is systematically characterized by consideration of in-die compressibility, specific energies, quick elastic recovery, tablet porosity and, tensile strength for the binder microcrystalline cellulose and three APIs. The decrease of particle size leads to an increase of the resistance against compression by trend and probably to a different contribution of the acting deformation mechanisms. The compactibility is increased with decreasing particle size because of the increasing number of bonds in a cross-sectional area of the tablet, as found by the application of the model of Rumpf. Furthermore, it is found that the model of Rumpf combined with the JKR model provides a meaningful property function to estimate tablet tensile strength.