Development of a density-tapered capillary gas cell for laser wakefield acceleration

A capillary gas cell for laser wakefield acceleration was developed with the aid of three-dimensional computational fluid dynamics simulations. The gas cell was specially designed to provide upward density tapering in the longitudinal direction, which is expected to suppress the dephasing problem in laser wakefield acceleration by keeping the accelerated electrons in the acceleration phase of the wake wave. The density-tapered capillary gas cell was fabricated by sapphire plates, and its performance characteristics were tested. The capillary gas cell was filled with a few hundred millibars of hydrogen gas, and a Ti:sapphire laser pulse with a peak power of 3.8 TW and a pulse duration of 40 fs (full width at half maximum) was sent through the capillary hole, which has a length of 7 mm and a square cross section of 350 × 350 µm². The laser-produced hydrogen plasma in the capillary hole was then diagnosed two-dimensionally by using a transverse Mach-Zehnder interferometer. The capillary gas cell was found to provide an upward plasma density tapering in the range of 10¹⁸ cm^-3-10¹⁹ cm^-3, which has a potential to enhance the electron beam energy in laser wakefield acceleration experiments.