Related Experiment Video
Updated: Nov 15, 2025
Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
Published on: December 20, 2024
Laser retrieval of cemented zirconia single unit implant restoration: A pilot study: Part I - Force values
Purpose:
To measure the retrieval force required to remove 1.5-mm-thick CAD/CAM zirconia copings cemented on zirconia (Zr) and titanium (Ti) stock implant abutments after a single application of erbium-doped yttrium scandium gallium garnet (Er:YSGG) laser.
Materials And Methods:
A total of 60 monolithic Zr copings were cemented on Zr and Ti implant abutments with either a resin-modified glass-ionomer (RelyX Luting Plus Cement, 3M ESPE; Rx) or a zinc oxide eugenol cement (Temp-Bond, Kerr; Tb). These abutment-coping specimens were randomly divided into 12 groups based on laser application (vs control [C]), abutment type (Zr vs Ti), cement (Rx vs Tb), and storage condition (dry [D] vs saline water [W]). Er:YSGG laser was applied at 6 W, 30% water-60% air, and 20 Hz (300 mJ/pulse energy) postcementation following a defined pattern. The force required to remove all the cemented copings from their abutments was measured on a universal testing machine (Instron model 4204). Descriptive statistics, multi-factor analysis of variance, and post hoc Tukey honest significant difference tests (α = .05) were performed.
Results:
The mean peak force values at removal of the Zr abutment groups were 470.3 ± 151.33 N (ZrRxC), 161.7 ± 19.29 N (ZrRxD), 316.03 ± 95.24 N (ZrRxW), 103.27 ± 24.53 N (ZrTbC), 39.33 ± 6.21 N (ZrTbD), and 20.33 ± 6.45 N (ZrTbW); and for the Ti abutment groups were 349.80 ± 106.82 N (TiRxC), 84.63 ± 14.02 N (TiRxD), 177 ± 62.57 N (TiRxW), 54.77 ± 9.10 N (TiTbC), 22.67 ± 4.32 N (TiTbD), and 11.57 ± 2.30 N (TiTbW).
Conclusion:
Within the limitations of this study, it can be concluded that Er:YSGG laser allows for easier removal of cemented Zr copings with lower removal forces, with Ti abutment groups requiring lower forces than Zr abutment specimens. No significant difference was seen between laser and control groups for Tb compared to Rx. Er:YSGG laser shows great clinical promise for predictable retrievability of cemented, monolithic Zr implant crowns, especially with stronger resin-based cement such as Rx. With further clinical evidence, this could be very useful for clinicians managing cement-retained implant crown complications.
