Characterization of velocity patterns produced by pulsatile and constant flows using 1000 fps high-speed angiography...

In order to accurately quantify rapidly changing blood flow velocities, as typically seen in the neurovasculature, high temporal resolution is necessary. Current methods to extract velocity data from angiographic image sequences are generally limited to 30 fps or less. High-speed angiography (HSA) with a maximal frame rate of 1000 fps can be used to evaluate time-dependent flow details normally averaged out with lower frame rates. For new HSA image sequences, two different quantitative methods were utilized to extract high-temporal resolution velocity changes: X-Ray Particle Image Velocimetry (X-PIV) and optical flow (OF). A variety of flow conditions were examined in a range of patient-specific 3D-printed phantoms. Both pulsatile and constant flow settings were investigated. X-PIV was performed using radiopaque sub-millimeter microspheres, which were tracked throughout the image sequence to provide accurate, but limited sampling of the velocity field within the 3D-printed models. Also, an open source optical flow algorithm, OpenOpticalFlow, was used to perform velocity estimation based on the spatio-temporal intensity changes of iodinated contrast wavefronts. Periodic changes in velocity within each phantom ROI can be illustrated throughout the pulsatile cycle capture by the high-speed detector. In the constant flow sequences, changes in velocity across the phantom geometry can be seen. The ability to accurately measure detailed velocity distributions and velocity changes throughout various flow conditions at high temporal resolution enables further insight into the evaluation and treatment of neurovascular disease states.