Related Experiment Video
Updated: Nov 15, 2025
Localized Bathless Metal-Composite Plating via Electrostamping
Published on: September 22, 2020
On the Features of Composite Coating, Based on Nickel Alloy and Aluminum-Iron Bronze, Processed by Direct Metal
Eugene E Feldshtein1, Oleg Devojno2, Marharyta Kardapolava2
1Institute of Mechanical Engineering, University of Zielona Góra, Prof. Z. Szafrana 4, 65-516 Zielona Góra, Poland.
Abstract:
In recent years, additive manufacturing technologies have become increasingly widespread with the most intensive development being direct metal deposition (DMD), alloys, and ceramic materials on a metal substrate. This study shows the possibilities of the effective formation of coatings, based on heterogeneous metal alloys (Ni-based alloy and Fe-Al bronze) deposited onto 1045 structural steel. Changes in the microhardness, the microstructure, and the tribological properties of the composite coating, depending on the laser spot speed and pitch during DMD processing, have been considered. It was revealed that if the components of the composite coating are chosen correctly, there are possible DMD conditions ensuring reliable and durable connection between them and with the substrate.
More Related Videos
09:12Production of Single Tracks of Ti-6Al-4V by Directed Energy Deposition to Determine the Layer Thickness for Multilayer Deposition
Published on: March 13, 2018
14:51An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature
Published on: September 23, 2018
Related Concept Videos
01:08Electrodeposition
Electrodeposition can...
01:03Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...