Event-Triggered Model-Free Adaptive Iterative Learning Control for a Class of Nonlinear Systems Over Fading Channels
Abstract:
This article investigates the problem of event-triggered model-free adaptive iterative learning control (MFAILC) for a class of nonlinear systems over fading channels. The fading phenomenon existing in output channels is modeled as an independent Gaussian distribution with mathematical expectation and variance. An event-triggered condition along both iteration domain and time domain is constructed in order to save the communication resources in the iteration. The considered nonlinear system is converted into an equivalent linearization model and then the event-triggered MFAILC independent of the system model is constructed with the faded outputs. Rigorous analysis and convergence proof are developed to verify the ultimately boundedness of the tracking error by using the Lyapunov function. Finally, the effectiveness of the presented algorithm is demonstrated with a numerical example and a velocity tracking control example of wheeled mobile robots (WMRs).
Related Concept Videos
01:23Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
01:26Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
01:24BIBO stability of continuous and discrete -time systems
To determine the BIBO stability, the convolution integral is utilized when a bounded continuous-time input is applied to a Linear Time-Invariant (LTI) system....
01:17Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
01:21Transfer Function in Control Systems
To derive the transfer function, consider a general nth-order linear time-invariant...
01:22Basic Continuous Time Signals
The unit step function, denoted u(t), is zero for negative time values and one for positive time values, exhibiting a discontinuity at t=0. This function often represents abrupt changes, such as the step voltage introduced when turning a car's...