Impact of digestate addition on the biostabilization of undersized fraction from municipal solid waste

Biostabilization is a commonly applied method in mechanical-biological treatment (MBT) plants to process municipal solid waste. In many ways, e.g. by applying additives to waste, MBT plant operators strive to enhance the effectiveness of biostabilization, which leads to reducing the time and energy outlays necessary for the process, as well as to minimizing the amount of final stabilized waste directed to landfills. This paper deals with the impact of digestate waste from agricultural biogas plants used as additive to the biostabilization process of undersized fraction from municipal solid waste (UFMSW) on the intensive phase of the process and properties of stabilized waste. The aim of this study was to assess whether, and if so to what extent, the application of digestate waste affects the process. Five different input compositions were tested (without digestate and with the addition of digestate at: 2.5; 5; 7.5 and 10 wt%). Waste treatment time was 2 weeks. Changes in moisture content, organic matter (OM), respiration activity (AT4), bulk density, air-filled porosity, heavy metal content, pH, carbon to nitrogen ratio, as well as composition of process gases emitted were evaluated. Additionally, microorganisms (including pathogens) inhabiting the processed waste in the aspect of waste sanitation were analyzed. It was found that the addition of digestate at 2.5, 5 and 7.5 wt% extended the duration of the thermophilic phase and decreased the CO₂ content in process gases. The addition of digestate at 2.5 wt% and 5 wt%, decreased also OM by approx. 25% of the initial value and AT4 by approx. 30%. It was also proved that the addition of digestate favors the limited sanitation of UFMSW. As a result of the research, it was found that the addition of digestate at 2.5 wt% and 5 wt% is sufficient to accelerate the aerobic biological degradation of UFMSW.