Heat waves and adaptation strategies in a mediterranean urban context

Giuseppe Maggiotto1, Alessandro Miani2, Emanuele Rizzo1

  • 1Italian Society of Environmental Medicine (SIMA), Milan, Italy.

Abstract

Related Concept Videos

Responses to Heat and Cold Stress02:45

Responses to Heat and Cold Stress

Every organism has an optimum temperature range within which healthy growth and physiological functioning can occur. At the ends of this range, there will be a minimum and maximum temperature that interrupt biological processes.
14.2K
Hot Weather Concreting01:20

Hot Weather Concreting

Concreting at elevated temperatures accelerates the hydration process, leading to quicker setting but potentially reducing the long-term strength of the concrete structure. Additionally, low air humidity fosters rapid moisture loss from the concrete, resulting in reduced workability, pronounced plastic shrinkage, and a higher likelihood of crazing.
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...
176
Homeostatic Imbalances in Body Temperature01:19

Homeostatic Imbalances in Body Temperature

Hyperthermia occurs when the body's temperature becomes unusually high, often due to heat exposure, intense physical activity, or certain illnesses. This condition can create a dangerous cycle where elevated body temperature increases the metabolic rate, generating more heat and potentially leading to organ failure and brain damage. A severe form of hyperthermia, called heat stroke, can raise body temperature to life-threatening levels. Fever, on the other hand, is a controlled form of...
2.0K
Masonry in Cold and Hot Weather Conditions01:21

Masonry in Cold and Hot Weather Conditions

In cold weather, masonry construction requires specific precautions to ensure mortar does not freeze before curing, as this can significantly weaken its strength and watertightness. Mortar temperature should be maintained between 60°F and 80°F to support proper hydration and curing. Below 40°F, mortar water must be heated, but should not exceed 120°F as high temperatures can reduce mortar's compressive and bond strength.
Other key practices include keeping masonry units...
189
Mechanisms of Heat Transfer01:14

Mechanisms of Heat Transfer

Heat transfer between the human body and its environment occurs through four main mechanisms: conduction, convection, radiation, and evaporation.
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
977
Requirements for Human Life01:26

Requirements for Human Life

The Earth and its atmosphere have provided humans with air, water, and food, but these are not the only requirements for survival. Humans also require a specific range of temperature and pressure that the Earth and its atmosphere provides.
Oxygen
Atmospheric air is only about 20 percent oxygen, but that oxygen is a key component of the chemical reactions that keep the body alive, including the reactions that produce ATP. Brain cells are susceptible to a lack of oxygen because they require a...
11.8K