Enzymes for Leather Processing: Effect on Pickling and Chroming
Renata Biškauskaitė1, Violeta Valeikienė1, Virgilijus Valeika1
1Faculty of Chemical Technology, Kaunas University of Technology, Radvilenu pl. 19, 50254 Kaunas, Lithuania.
Abstract:
Recently, increasing attention has been paid to the application of enzymes in a wide variety of leather production processes. The aim of the present study was to investigate the action of enzymatic pickling on derma's collagen and the influence of this action on subsequent processes and properties of chromed and finished leather. The application of active in acidic medium proteolytic enzymes in the pickling process led to an additional impact on derma structure: collagen was more strongly affected and the porosity of the pelt dermis was reduced, but the hide became more thermally stable. The enzymatically pickled pelt bonded more chromium and reached higher shrinkage temperature while chroming; dyes penetrated deeper; such leather bonded more fatliquors. On the other hand, the action of enzymes worsened the physical-mechanical properties of the leather, as the experimental leather was weaker than the conventional one. The first was characterised by weaker grain layer and had significantly higher relative elongation. Therefore, as some properties improve and others worsen during such a process, the application of every enzyme should be carefully investigated and optimized to produce a leather with defined properties.
Related Concept Videos
Extraction: Advanced Methods
Ionic Strength: Effects on Chemical Equilibria
In this solution, the primary...
Introduction to Mechanisms of Enzyme Catalysis
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...
Factors Influencing the Rate of Chemical Reactions
Concentration and Pressure:
The more particles present within a given space, the more likely those particles are to bump into one another....
Effects of EDTA on End-Point Detection Methods
In the visual method, metal-ion indicators (metallochromic dyes), which have distinct colors in their free and complex forms, are added to the mixture to signal the titration's end point. They form stable complexes with metal ions, but these complexes are weaker than the corresponding metal–EDTA complexes. As a...


