Prussian blue analogs derived Fe-Ni-P@nitrogen-doped carbon composites as sulfur host for high-performance...

Lithium-sulfur (Li-S) batteries have drawn a lot of attention owing to the high theoretical capacity of 1675 mAh g^-1, environmental friendliness and relative abundance of sulfur. Nevertheless, the severe dissolution and migration of lithium polysulfides (LiPSs) and poor conductivity of sulfur greatly hinder the practical application of Li-S batteries. In this work, Fe-Ni-P@nitrogen-doped carbon (named as Fe-Ni-P@NC) derived from Fe-Ni Prussian blue analog (Fe-Ni PBA) was used as highly efficient sulfur host for Li-S batteries. The Fe-Ni-P particles not only enhance the adsorption of LiPSs but also effectively promote the conversion of LiPSs. In addition, the CN^- of PBAs can readily generate nitrogen-doped carbon during pyrolysis, which can improve the conductivity of composites. Due to these advantages, Li-S batteries using S@Fe-Ni-P@NC composites cathodes exhibited good electrochemical performance with outstanding rate capability and stable cycling over 500 cycles with a lower capacity fading rate of 0.08% per cycle at 1 C.