3D Printed Sub-Terahertz All-Dielectric Lens for Arbitrary Manipulation of Quasi-Nondiffractive Orbital Angular...

Terahertz (THz) vortex waves carrying orbital angular momentum (OAM) hold great potential in dealing with the capacity crunch in wireless high-speed communication systems. Nevertheless, it is quite a challenge for the widespread applications of OAM in the THz regime due to the beam divergence and stringent alignment requirement. To address this issue, an all-dielectric lens (ADL) is proposed for the arbitrary manipulation of quasi-nondiffractive THz OAM waves (QTOWs). On the basis of the concept of the optical conical lens and the multivorticity metasurface, the beam number, the topological charge (TC), and the deflection angle as well as the nondiffractive depth of the generated THz OAM waves are controllable. For proof-of-concept, two ADLs are 3D printed to create single and dual deflected QTOWs, respectively. Remarkably, measured by a THz imaging camera, the desired QTOWs with high mode purity are observed in predesigned directions with a nondiffractive depth predefined theoretically. The proposed designs and experiments, for the first time, verified that the QTOWs could be achieved with a nondiffractive range of 55.58λ_g (λ_g = wavelength at 140 GHz) and large deflection angles of 30° and 45°.