Related Experiment Video
Updated: Nov 8, 2025
Cone Beam Intraoperative Computed Tomography-based Image Guidance for Minimally Invasive Transforaminal Interbody Fusion
Published on: August 6, 2019
[Finite element analysis of the effect of plate placement angle on cervical spine stability in anterior cervical
Jian-Chao Wu1, Zheng-Wei Shi1, Yi-Xin Pan1
1Department of Orthopaedics, the Second Affiliated Hospital of Lanzhou University, Lanzhou 730030, Gansu, China.
Objective:
Using the method of finite element analysis, to compare the biomechanical properties between the plate deviating from the long axis of the cervical spine and the standard placement of the plate in the anterior cervical fusion surgery.
Methods:
A healthy female volunteer was selected and CT scan (C1-T1) was performed. Using Mimics 19.0, Geomagic Studio 2015, Solidworks 2018, Ansys Workbench 17.2 to establish a lower cervical spine (C3-C7) model and to verify the reliability of the model. Subsequently, anterior cervical plates of different angles and lengths were placed to establish an anterior cervical discectomy fusion (ACDF) model. Applying 73.6 N axial pressure and 1 NM pure moment on C3 to make the model produce flexion, extension, lateral bending and rotation activities, observed the model stress cloud diagram and recorded the maximum stress value of the instrument and the intervertebral mobility.
Results:
The lower cervical spine (C3-C7) finite element model was established and verified against the published literature on the range of motion (ROM) of cervical spine. Effect of steel plate offset axis on stress distribution, maximum stress value and intervertebral ROM of internal fixation apparatus was minimal, and the mechanical effect of steel plate offset was less in double section steel plate than in single section steel plate.
Conclusion:
Little effect on the mechanical stability of the cervical spine was anticipated when the anterior cervical plate was not perfectly aligned with the long axis of the cervical spine. If the tilt of the plate in clinical surgery is less than 20°, there is no need to readjust the position of the plate.
