Related Experiment Video
Updated: Nov 7, 2025

Manufacturing, Control, and Performance Evaluation of a Gecko-Inspired Soft Robot
Published on: June 10, 2020
Study of Obstacle-Crossing and Pitch Control Characteristic of a Novel Jumping Robot
Jixue Mo1,2, Ze Yan2, Bing Li1,2
1State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin 150001, China.
Abstract:
In this study, we demonstrated a novel jumping robot that has the ability of accurate obstacle-crossing jumping and aerial pitch control. The novel robot can quickly leap high into the air with a powerful water jet thruster. The robot was designed to overcome multiple general obstacles via accurate jumping. Then a modified whale optimization algorithm (MWOA) was proposed to determine an optimized jumping trajectory according to the form of obstacles. By comparing with classical intelligent optimization algorithms, the MWOA revealed superiority in convergence rate and precision. Besides, the dynamics model of aerial pitch control was built and its effect was verified by the pitch control experiment. Lastly, the robot's obstacle-crossing experiments were performed and the results validated the robot's good ability of obstacle-crossing and aerial body righting. We believe the optimization of trajectory and the pitch control are of great help for the jumping robot's complex jumping and obstacle-crossing performance.
Related Concept Videos
Hydraulic Jump: Problem Solving
Rolling Resistance: Problem Solving
Three-Dimensional Force System:Problem Solving
To solve a three-dimensional force system, first resolve each force into its respective scalar components. Do this using...
Two-Dimensional Force System: Problem Solving
The first step to solving a two-dimensional force system problem is to draw a free-body diagram of the object under consideration. This diagram helps identify all the external forces acting on the object, including their...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Hierarchy of Motor Control

