An Energy Harvester with Temperature Threshold Triggered Cycling Generation for Thermal Event Autonomous Monitoring

This paper proposes a temperature threshold triggered energy harvester for potential application of heat-event monitoring. The proposed structure comprises an electricity generation cantilever and a bimetallic cantilever that magnetically attract together. When the structure is heated to a pre-set temperature threshold, the heat absorption induced bimetallic effect of the bimetallic cantilever will cause sufficient bending of the generation cantilever to get rid of the magnetic attraction. The action triggers the freed generation cantilever into resonance to piezoelectrically generate electricity, and the heated bimetallic cantilever dissipates heat to the environment. With the heat dissipated, the bimetallic cantilever will be restored to attract with the generation cantilever again and the structure returns to the original state. Under continual heating, the temperature threshold triggered cycle is repeated to intermittently generate electric power. In this paper, the temperature threshold of the harvester is modeled, and the harvester prototype is fabricated and tested. The test results indicate that, with the temperature threshold of 71 °C, the harvesting prototype is tested to generate 1.14 V peak-to-peak voltage and 1.077 μW instantaneous power within one cycle. The thermal harvesting scheme shows application potential in heat event-driven autonomous monitoring.