Immobilisation of phosphonium-based ionic liquid in polysulfone capsules for the removal of phenolic compounds, with...

Phosphonium-based ionic liquid immobilised in polysulfone capsules were prepared by the phase inversion technique for the adsorption of different phenolic compounds from aqueous solution. Some techniques, including Scanning Electron Microscopy (SEM), surface analysis by Brunauer-Emmett-Teller (BET), Fourier Transform Infrared Spectroscopy (FT-IR) and Thermogravimetric Analysis (TGA), were used to characterize the capsule and indicated that trihexyltetradecylphosphonium decanoate (ionic liquid) was successfully immobilised in polysulfone, the immobilisation was determined to be 63.29%. Adsorption tests showed that the developed capsules have the potential to remove varied phenolic compounds. For compounds 2,4-dichlorophenol (2,4-DCP) the best removal was achieved between pH 3.0 and 9.0. Temperature variation (25-70 °C) and sodium chloride concentration (0-1000 mg⋅L^-1) had no significant changes in adsorption, demonstrating the scope for using this adsorbent with real effluents. Adsorption kinetics demonstrated the mechanism occurs in second order, the Weber-Morris model delimited the intraparticle diffusion as the adsorption limiter. The Redlich-Peterson model was the isothermal analysis that best suited the experimental data, with a β value equal to 0.821 approaching the Langmuir model, which obtained a q_max of 404.50 mg⋅g^-1. Consequently, these results demonstrate that these capsules have potential application in the treatment of environmental pollution caused by phenolic compounds.