Enhancing biological nitrogen removal for a retrofit project using wastewater with a low C/N ratio-a model-based...

Anaerobic ammonium oxidation (anammox) has the merit of saving the carbon source and aeration energy for nitrogen (N) removal, but it is normally a challenge to achieve mainstream anammox. In this study, the potential to enhance the N-removal capability of an existing University of Cape Town membrane bioreactor system (UCT-MBR) system is evaluated through process modeling. In addition to external carbon addition, the UCT-MBR system is proposed to be converted into an anoxic-oxic (AO) configuration with two operation plans: one is single-sludge (suspended sludge) and the other is double-sludge (suspended sludge and biofilm). The choice between pushing anammox and enhancing conventional heterotrophic denitrification is assessed. The simulation result indicates it is feasible to strategically adjust the spatial-temporal balance between electron donors and electron acceptors to achieve enhanced N-removal by utilizing the influent organic carbon other than adding external carbon. Although anammox can be promoted in the double-sludge-based AO under low-DO conditions, pushing anammox will weaken the system's resilience to influent fluctuations and carries no economic advantage over the single-sludge-based AO. Overall, this study concurs with the United Nations Sustainable Development Goal that the wastewater industry should seek more energy-efficient measures for wastewater treatment.