Related Experiment Video
Updated: Nov 3, 2025

Quantitative Visualization and Detection of Skin Cancer Using Dynamic Thermal Imaging
Published on: May 5, 2011
Spatiotemporal Pinpoint Cooling Sensation Produced by Ultrasound-Driven Mist Vaporization on Skin
Abstract:
In this study, we achieved a noncontact tactile display that presents a pinpoint and instantaneous cooling sensation on the skin surface with no devices directly in contact with the user's body. We employed ultrasound phased arrays to generate a focused ultrasound, which locally and instantaneously expedites the vaporization of room-temperature water mist floating near the surface of the user's skin, offering a sudden pinpoint cooling sensation. In this article, we describe the physical configuration of the proposed method and show the measurement results, demonstrating how the user's skin surface was cooled. During the experiments, we discovered that a part of the skin exposed to a focused ultrasound within the floating mist was selectively cooled with negligible delay. Our prototype system offers a cooling spot of approximately 15 mm in diameter, which causes a temperature decrease of 4.6 K in 1 s and 3.3 K in the first 0.5 s on a hand situated 500 mm away from the device. Additionally, the ultrasound-driven cooling spot can be controlled on the skin surface, which is felt as a cool moving spot. Such a position-free cooling system with a high spatiotemporal resolution will open the door to unprecedented practical tactile applications.
Related Concept Videos
Thermosensation
Vaporization
Assessing Body Temperature - Temporal Artery
Step 1: Perform hand hygiene and don a fresh pair of gloves to prevent cross-infection and ensure patient safety.
Step 2: Explain the procedure to the patient to establish trust. Clear communication establishes trust with the patient, ensures they understand what to expect, promotes cooperation, and enhances comfort during the procedure.
Step 3: Assess the patient's...
Assessing Body Temperature - Tympanic membrane
Step 1: Begin by practicing good hand hygiene to prevent the transmission of microorganisms.
Step 2: Turn on the thermometer and wait until the ready sign appears on the screen to ensure accurate measurement.
Step 3: Slide the probe cover in place to prevent cross-contamination.
Step 4: Instruct the patient to tilt their head to the side for comfort and check for cerumen...
Phase Transitions: Vaporization and Condensation
Mechanism of heat transfer

