Related Experiment Video
Updated: Nov 2, 2025

Studying Large Amplitude Oscillatory Shear Response of Soft Materials
Published on: April 25, 2019
Experimental validation for the quasi-shear wave behavior of LiF single crystal along a low-symmetry orientation
Qiancheng Liu1,2, Ping Xia3, Xulin Yang3
1Institute for Advanced Study, Chengdu University, Chengdu, Sichuan 610106, People's Republic of China.
Abstract:
To investigate the quasi-shear wave behavior and the underlying microscopic mechanism of an anisotropic solid under dynamic deformation beyond its Hugoniot elastic limit, LiF single crystals are shock-compressed along the [310] low-symmetry crystallographic orientation via normal plate-impact method. Interfacial velocity profiles are measured with a Doppler pin system. Peak normal stresses in samples vary between 1.91 GPa and 3.23 GPa. Under the lowest stress in this study, the resultant wave profile shows typical elastoplastic two-wave structures. In the second lowest stress experiment, an irregularity of the plastic wave or the inelastic deformation wave appears in the wave profile. At two higher stresses, a third wave is found following the elastoplastic two waves propagating along the normal direction. Our observations of three-wave structures in the [310] LiF are in excellent agreement with the simulation result of literature. This fact confirms that the immobilization of dislocations and rotation of slip planes are responsible for the microscopic mechanism of the three-wave propagations in the [310] LiF under uniaxial shock loading. The mechanism of the elastoplastic two-wave to anomalous three-wave structures evolution of material under different peak normal stresses will also be discussed.
More Related Videos
07:48An Externally-Heated Diamond Anvil Cell for Synthesis and Single-Crystal Elasticity Determination of Ice-VII at High Pressure-Temperature Conditions
Published on: June 18, 2020
10:36Stress Distribution During Cold Compression of Rocks and Mineral Aggregates Using Synchrotron-based X-Ray Diffraction
Published on: May 20, 2018
Related Concept Videos
Elastic Strain Energy for Shearing Stresses
Normal Strain under Axial Loading
Shearing Strain
Shearing Stress
The average shearing stress can be calculated by dividing the shear by the area of the cross-section.
Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity
Eccentric Axial Loading in a Plane of Symmetry