Study on the Fluidization Quality Characterization Method and Process Intensification of Fine Coal Separation in a...

Uniform and stable bed density is the basis of efficient coal separation by a gas-solid dense medium fluidized bed. The traditional air dense medium fluidized bed (ADMFB) is a kind of bubbling bed. By introducing vibration energy, a vibrated dense medium fluidized bed (VDMFB) with uniform and stable bed density can be formed, where the bubble merger is suppressed, the gas-solid contact can is strengthened, and the fluidization quality is also improved. In this paper, the transfer process of vibration energy in a fluidized bed is studied in detail. By calculating the coherence of pressure signals induced by vibration energy and bubbles at different bed heights, the suppression effect of vibration energy on bubble merger is analyzed. The coefficient R _imp to quantitatively evaluate the improvement effect of vibration energy on the fluidization quality is proposed. The differences and incentives of density uniformity and stability in different height bed areas have been clarified under different vibration parameters and gas flow parameters. It is proposed that the optimal separation bed height area of VDMFB is about H = 40-150 mm. The separation effect of the ADMFB and the VDMFB on 1-6 mm fine coal was compared. The results show that, compared with the ADMFB, the VDMFB reduces the separation probable error, E, from 0.134 to 0.083 g/cm³, and the ash content of the clean coal is reduced from 18.83 to 14.97%. The vibration energy significantly improves the fluidization quality of the ADMFB and the separation effect of fine coal.