Long-Lived T-Shaped Micropillars with Submicron-Villi on PP/POE Surfaces with Grinding-Enhanced Water Repellency...

Superhydrophobic properties are derived from the roughness of the surface of micro/nanostructures and low-surface-energy materials. However, they are both easy to damage on superhydrophobic surfaces after mechanical abrasion in practical applications, resulting in the transition from the Cassie-Baxter state to the Wenzel state and even the loss of water repellency. In this work, the mechanical properties of polypropylene (PP) toughened with poly(ethylene-co-octene) (POE) were improved for the fabrication of long-lived T-shaped micropillars with submicron-villi on top by a combined method of compression molding and grinding. A universal testing machine was modified as equipment for the precise control of the traveling distance of specimens on sandpaper in precise. The PP/POE blend possessed high tensile strength of up to ∼23.84 MPa as well as elongation at break of ∼533.60%. The abrasive grains on sandpaper reshaped their surface morphologies from micropillars to T-shaped microstructures, on which the submicron-villi as secondary structures formed. The abraded microstructured PP/POE surface exhibited the highest contact angle of 154.4° and the most stable wetting state with a bouncing height of 7.68 mm (3.2 times the diameter of the 7-μL droplet) after a traveling distance of 1000 mm on 3000-grit sandpaper among the abraded and unabraded PP/POE surfaces.