Biological modification in air-cathode microbial fuel cell: Effect on oxygen diffusion, current generation and...

Oxygen diffusion in the anodic chamber is the major limitation of air-cathode microbial fuel cell (MFC) design. To address this drawback, the application of microbial (Escherichia coli EC) patch on cathode was tested. Pseudomonas aeruginosa BR was used as exoelectrogen during the study. The MFC reactor with a patch had a better electron transfer rate, degraded 94.64% of synthetic wastewater (BR_SyW) and its current generation was increased by 95.66%. The maximum power density recorded for BR_SyW was 259.34 ± 7.28 mW/m². Application of patch in real wastewater (BR + Sludge) condition registered 63.18% of wastewater degradation, increment in current generation (59.71%) and decreased the charge transfer and ohmic resistances by 97.95% and 97.01% respectively. Apart from hindering oxygen diffusion and better current generation, this simple design also worked as a two-step degradation system. Thus, such MFC reactor is a potential candidate for wastewater management and green energy generation.