Related Experiment Video
Updated: Oct 31, 2025

Measuring Magnetically-Tuned Ferroelectric Polarization in Liquid Crystals
Published on: August 15, 2018
Current-Mode Dielectric Spectroscopy for Liquid Permittivity Measurement
Abstract:
In this work, we propose a current-mode dielectric spectroscopy integrated circuit (IC) for the detection of liquids permittivity at microwave frequency range. The current-mode sensing scheme presents wideband operation with enhanced dynamic range compared to conventional voltage-mode sensing approach. A low intermediate frequency (IF) receiver architecture further provides better performances in flicker noise, dc offset, and harmonic mixing that degrade a sensor accuracy in zero-IF receiver architecture. Measured maximum conversion gain is 31.4 dB at 0.4 GHz RF frequency, while the 1dB-compression point ([Formula: see text]) is measured to be -8 dBm at 1 GHz RF frequency. The operation frequency of the proposed spectroscopy IC is from 50 MHz to 4 GHz according to 3 dB bandwidth. The permittivity measurements for propanol across the frequency range of 0.03-10 GHz are performed with root mean square (rms) permittivity error of 0.49. The dielectric spectroscopy IC is fabricated in 28-nm CMOS technology with active area of 0.5 mm × 0.2 mm only, while consuming 13 mW from a 1.2 V supply.
Related Concept Videos
Susceptibility, Permittivity and Dielectric Constant
Dielectric Polarization in a Capacitor
Voltammetric Techniques: Linear-Scan (E vs Time)
Electrostatic Boundary Conditions in Dielectrics
Consider a case where both the mediums across a boundary are two different dielectric materials. Recall that the electric field and electric displacement are proportional and related through the material's permittivity....
Electromagnetic Waves in Matter
Consider the electromagnetic wave passing through a dielectric medium. In such a case, Maxwell's equations get modified. In Ampere's law, ε0 , the dielectric permittivity of free space is replaced with ε, the permittivity of dielectric. Also, the vacuum permeability μ0 is replaced by the permeability of the medium, μ.
Furthermore,...
High-Performance Liquid Chromatography: Types of Detectors

