A Novel Feature Extraction and Fault Detection Technique for the Intelligent Fault Identification of Water Pump
Muhammad Irfan1, Abdullah Saeed Alwadie1, Adam Glowacz2
1Electrical Engineering Department, College of Engineering, Najran University, Najran 61441, Saudi Arabia.
Abstract:
The reliable and cost-effective condition monitoring of the bearings installed in water pumps is a real challenge in the industry. This paper presents a novel strong feature selection and extraction algorithm (SFSEA) to extract fault-related features from the instantaneous power spectrum (IPS). The three features extracted from the IPS using the SFSEA are fed to an extreme gradient boosting (XBG) classifier to reliably detect and classify the minor bearing faults. The experiments performed on a lab-scale test setup demonstrated classification accuracy up to 100%, which is better than the previously reported fault classification accuracies and indicates the effectiveness of the proposed method.
Related Concept Videos
Bearings: Problem Solving
Journal Bearings
To better understand the concept of journal bearings, consider a rope winch with dry or...
Pivot Bearings
A pivot bearing is a specialized type of bearing designed to support axial loads on a rotating shaft. The bearing surface, or the pivot, is positioned at the end of a shaft to support the axial thrust. The pivot may...
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular...
Fault Types
For line-to-line faults occurring between phases B and C, the...
Mechanical Efficiency of Real Machines
However, in reality, no machine can be truly ideal, and all of them experience some...


