Four-Period Vertically Stacked SiGe/Si Channel FinFET Fabrication and Its Electrical Characteristics

In this paper, to solve the epitaxial thickness limit and the high interface trap density of SiGe channel Fin field effect transistor (FinFET), a four-period vertically stacked SiGe/Si channel FinFET is presented. A high crystal quality of four-period stacked SiGe/Si multilayer epitaxial grown with the thickness of each SiGe layer less than 10 nm is realized on a Si substrate without any structural defect impact by optimizing its epitaxial grown process. Meanwhile, the Ge atomic fraction of the SiGe layers is very uniform and its SiGe/Si interfaces are sharp. Then, a vertical profile of the stacked SiGe/Si Fin is achieved with HBr/O₂/He plasma by optimizing its bias voltage and O₂ flow. After the four-period vertically stacked SiGe/Si Fin structure is introduced, its FinFET device is successfully fabricated under the same fabrication process as the conventional SiGe FinFET. And it attains better drive current I_on, subthreshold slope (SS) and I_on/I_off ratio electrical performance compared with the conventional SiGe channel FinFET, whose Fin height of SiGe channel is almost equal to total thickness of SiGe in the four-period stacked SiGe/Si channel FinFET. This may be attributed to that the four-period stacked SiGe/Si Fin structure has larger effective channel width (W_eff) and may maintain a better quality and surface interfacial performance during the whole fabrication process. Moreover, Si channel of the stacked SiGe/Si channel turning on first also may have contribution to its better electrical properties. This four-period vertically stacked SiGe/Si channel FinFET device has been demonstrated to be a practical candidate for the future technology nodes.