Study of the Effect of Reflections on High-Power, 110 GHz Pulsed Gyrotron Operation

The effect of reflection is studied experimentally and theoretically on a high-power 110 GHz gyrotron operating in the TE_22,6 mode in 3 μs pulses at 96 kV, 40 A. The experimental setup allows variation of the reflected power from 0 to 33 % over a range of gyrotron operating conditions. The phase of the reflection is varied by translating the reflector along the axis. Operating at a higher efficiency point, at 4:40 T with 940 kW of output power, reflected power exceeding 11% causes a switch from operation in the TE_22,6 to simultaneous operation in the TE_22,6 and TE_21,6 modes with a large decrease of the total gyrotron output power. This switching effect is in good agreement with simulations using the MAGY code. Operating at a more stable point, 4:44 T with 580 kW of output power, when the reflection is increased, the output power remains in the TE_22,6 mode but it decreases monotonically with increasing reflection, dropping to 200 kW at 33% reflection. Furthermore, at a reflection above 22%, a power modulation at 25 to 30 MHz is observed, independent of the phase of the reflected wave. Such a modulated signal may be useful in spectroscopic and other applications.