Experimental Demonstration of 3 × 3 MIMO LED-to-LED Communication Using RGB Colors

Optical wireless communication (OWC) is one of the promising candidates for beyond fifth-generation communication (B5G). Depending on the type of transmitters, receivers, and information carriers applied in the system, OWC can be categorized into visible light communication, light fidelity, free-space optical communication, optical camera communication, etc. In addition to these OWC subcategories, this paper proposes light-emitting diode (LED)-to-LED communication as another subcategory of OWC technique. Furthermore, we show an experimental demonstration of the multiple-input multiple-output (MIMO) LED-to-LED communication system using red, green, and blue colored LEDs. We believe that LED-to-LED communication is an effective solution to resolve the communication burden arising from massive connectivity in B5G internet of things. Along with the measurement results of the transmitter LED, receiver LED, and the channel properties, it is shown that the MIMO LED-to-LED system is able to successfully recover the transmitted signal with low inter-channel interferences due to the receiver LED's unique characteristics. Finally, the bit error rate (BER) performance of the MIMO LED-to-LED system is shown in comparison with the BER performance of the single-input single-output (SISO) LED-to-LED system. We successfully implemented the 3 × 3 MIMO LED-to-LED communication system using RGB colors at a data rate of 30.62 kbps over a 10 cm transmission distance along with direct current biased optical orthogonal frequency division multiplexing (DCO-OFDM) modulation and zero-forcing (ZF) equalizer.