Related Experiment Video
Updated: Oct 26, 2025

Experimental System of Solar Adsorption Refrigeration with Concentrated Collector
Published on: October 18, 2017
Performance analysis of crushed gravel sand heat storage and biomass evaporator-assisted single slope solar still
Ramasamy Dhivagar1,2, Murugesan Mohanraj3,4, Yerzhan Belyayev4,5
1Department of Mechanical Engineering, Hindusthan College of Engineering and Technology, Coimbatore, 641032, India. dhivagar.papers@gmail.com.
Abstract:
In this research work, the productivity, energy, exergy, and economic and enviro-economic performance in crushed gravel sand heat storage and biomass evaporator-assisted solar still (CGS-BSS) have been investigated and compared the results with conventional solar still (CSS) under the similar climatic conditions of Coimbatore City during the year 2019. The heat accumulated in crushed gravel sand and biomass evaporator have been used to preheat the inlet saline water and air vapor before entering into the solar still. This results in enhanced air vapor mixture temperature and evaporative heat transfer rate of CGS-BSS significantly. The productivity, energy, and exergy efficiencies in CGS-BSS were improved by 34.6%, 34.4%, and 35%, respectively when compared to CSS. In economic analysis, the payback period (PBP) in both CGS-BSS and CSS was estimated to be about 4.7 months and 3.9 months, respectively. Furthermore, in enviro-economic analysis, the CO2 emission estimated in CGS-BSS and CSS was about 16.63 tons and 8.18 tons, respectively during its lifetime of 10 years.
Related Concept Videos
Design Example: Aggregate Gradation
The grading, or particle-size distribution, of sand is determined using sieve analysis, with standard sizes ranging from 150 μm to 10 mm (ASTM No. 100 sieve to 3⁄8 in. sieve). Sand is...
Specific Gravity of Aggregate
Bulk or gross specific gravity is calculated by taking the ratio of the mass of aggregates in the saturated surface-dry state to the total volume that includes both the solids and the voids within the...
Design Example: Managing Concrete Workability

