Statistical optimization of amorphous iron phosphate: inorganic sol-gel synthesis-sodium potential insertion

Iron phosphate, Fe₂ (HPO₄)₃*4H₂O, is synthesized at ambient temperature, using the inorganic sol-gel method coupled to the microwave route. The experimental conditions for the gelling of Fe (III)-H₃PO₄ system are previously defined. Potentiometric Time Titration (PTT) and Potentiometric Mass Titration (PMT) investigate the acid-base surface chemistry of obtained phosphate. Variations of surface charge with the contact time, Q a function of T, are examined for time contact varying in the range 0-72 h. The mass suspensions used for this purpose are 0.75, 1.25 and 2.5 g L^-1. The point of zero charge (PZC) and isoelectric point (IEP) are defined using the derivative method examining the variations [Formula: see text], at lower contact time. A shift is observed for PZC and IEP towards low values that are found to be 2.2 ± 0.2 and 1.8 ± 0.1, respectively. In acidic conditions, the surface charge behavior of synthesized phosphate is dominated by [Formula: see text] group which pK_a = 2.45 ± 0.15. Q against T titration method is performed for synthesized Fe₂ (HPO₄)₃*4H₂O in NaCl electrolytes. The maximal surface charge (Q) is achieved at the low solid suspension. Hence, for m = 0.75 g L^-1, Q value of 50 coulombs is carried at μ = 0.1 and pH around 12, while charge value around 22 coulombs is reached in the pH range: 3-10. The effect of activation time, Q and pH on sodium insertion in iron phosphate, were fully evaluated. To determine the optimal conditions of the studied process, mathematical models are used develop response surfaces in order to characterize the most significant sodium interactions according to the variation of the pH, Q, the contact time and the contents of the synthesized material.