Related Experiment Video
Updated: Oct 23, 2025
Plasma Polishing as a New Polishing Option to Reduce the Surface Roughness of Porous Titanium Alloy for 3D Printing
Published on: April 28, 2023
Development of Porous Photopolymer Resin-SWCNT Produced by Digital Light Processing Technology Using for Bone Femur
Hossein Akbari-Aghdam1,2, Abolfazl Bagherifard2, Mehdi Motififard3
1Department of Orthopedic Surgery, School of Medicine, Isfahan University of Medical Sciences, Isfahan, Iran.
Background:
Although bone tissue has the unique characteristic of self-repair in fractures, bone grafting is needed in some situations. The synthetic substances that are used in such situations should bond to the porous bones, be biocompatible and biodegradable, and do not stimulate the immune responses. Biomaterial engineering is the science of finding and designing novel products. In principle, the most suitable biodegradable matrix should have adequate compressive strength of more than two megapascals. At this degradation rate, the matrix can eventually be replaced by the newly formed bone, and the osteoprogenitor cells migrate into the scaffold. This study aimed to evaluate the fabrication of a scaffold made of polymer-ceramic nanomaterials with controlled porosity resembling that of spongy bone tissue.
Methods:
A compound of resin polymer, single-walled carbon nanotube (SWCNT) as reinforcement, and hydroxyapatite (HA) were dissolved using an ultrasonic and magnetic stirrer. A bio-nano-composite scaffold model was designed in the SolidWorks software and built using the digital light processing (DLP) method. Polymer-HA scaffolds with the solvent system were prepared with similar porosity to that of human bones.
Results:
HA-polymer scaffolds had a random irregular microstructure with homogenizing porous architecture. The SWCNT improved the mechanical properties of the sample from 25 MPa to 36 MPa besides having a proper porosity value near 55%, which can enhance the transformation and absorption of protein in human bone.
Conclusion:
The combined bio-nanocomposite had a suitable porous structure with acceptable strength that allowed it to be used as a bone substitute in orthopedic surgery.
