Related Experiment Video
Updated: Aug 11, 2026

Towards Biomimicking Wood: Fabricated Free-standing Films of Nanocellulose, Lignin, and a Synthetic Polycation
Published on: June 17, 2014
Techno-economic analysis of producing xylo-oligosaccharides and cellulose microfibers from lignocellulosic biomass
Kai Lan1, Yiling Xu1, Hoyong Kim2
1Department of Forest Biomaterials, North Carolina State University, Raleigh, NC 27695, USA.
Abstract:
This study assesses the economic performance of a biorefinery producing xylo-oligosaccharides (XOS) from miscanthus by autohydrolysis and purification based on a rigorous model developed in ASPEN Plus. Varied biorefinery capacities (50-250 oven dry metric ton (ODMT)/day) and three XOS content levels (80%, 90%, 95%) are analyzed. The XOS minimum selling price (XOS MSP) is varied between $3,430-$7,500, $4,030-$8,970, and $4,840-$10,640 per metric ton (MT) for 80%, 90%, and 95% content, respectively. The results show that increasing biorefinery capacity can significantly reduce the XOS MSP and higher purity leads to higher XOS MSP due to less yield, and higher capital and operating costs. This study also explores another system configuration to produce high-value byproducts, cellulose microfiber, by utilizing the cellulose to produce microfiber instead of combusting for energy recovery. The XOS MSP of cellulose microfiber case is $2,460-$7,040/MT and thus exhibits potential economic benefits over the other cases.
Related Concept Videos
Bioreactor Controls-III
Production of Alcohol
Production of Organic Acids

