Characteristic evaluation of a simple hand-made semiconductor dosimeter for mammography

Daily quality control of mammography equipment is important for providing optimal images and determining appropriate doses. To popularise dosimeters, the Measurement Division, the Japanese Society of Radiological Technology hold a seminar on making simple dosimeters. At this seminar, a hand-made dosimeter for mammography (HD-M) can be made at low cost. However, HD-Ms employ semiconductors, and their energy responses are subject to significant variations. This investigation involved the determination of precautions when using HD-Ms, examining their energy response characteristics and measurable energy ranges. HD-M has four types of selectors for response correction. When the selector and the tube voltage were equal, the HD-M readings matched that of the ionisation chamber within 5%. However, in case of target filter combinations and measuring tube voltages that the selector does not support, the HD-M readings differed by up to 53% from the ionisation chamber values. HD-M may use different measurement circuits and semiconductor elements depending on the time of the seminar. In this study, it was clarified that the correction factork, which is the average value of the ratio of the measured value of the ionisation chamber dosimeter to the measured value of HD-M, changes from 0.62 to 1.53 depending on irradiation conditions such as the combination of target filters and the tube voltage. It was demonstrated that HD-M functions sufficiently as a dosimeter for daily management by determining the correction factor using the method proposed in this study.