Competitive adsorption of heavy metals onto modified biochars: Comparison of biochar properties and modification...

Various biochars (BCs) have been developed to remove heavy metals contained in road runoff; however, there is insufficient information regarding the competitive adsorption efficiency of modified BC with regard to heavy metals due to a lack of comparative evaluation based on BC properties and modification methods. In this study, three different types of BC (RBC: rice husk, WBC: wood chip, MBC: mixture) were modified following five different methods: acidic, alkaline, oxidic, and manganese oxide (MnOx) and iron oxide (FeOx) impregnation. The changes in the physicochemical and morphological properties of the modified BC were investigated, and the adsorption characteristics of three heavy metals (Cd, Pb, and Zn) under single and mixed conditions were compared and evaluated. The improvements in the BC properties varied for different BC types and modification methods; in particular, alkaline and manganese modification caused substantial the changes in the surface area and functional groups (such as aromatic ring, -OH, and Mn-O groups). The BC prepared by manganese oxide impregnation absorbed a high amount of heavy metals (>9.15 mg/g) even under mixed conditions through cation exchange and surface complexation. The distribution coefficient (K_d) of heavy metals was high in the order of Pb > Cd > Zn; thus, the adsorption of Pb replaced that of Zn in competitive adsorption due to the difference in their affinity to BC. Therefore, the results suggest that BC prepared by manganese oxide impregnation is suitable for removing heavy metals from road runoff, as it maintained high heavy metals adsorption regardless of the BC material, even under competitive conditions.