Related Experiment Video
Updated: Oct 20, 2025

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
Published on: January 29, 2020
The Impact of Long-Term Physical Salt Attack and Multicycle Temperature Gradient on the Mechanical Properties of Spun
Romualdas Kliukas1, Arūnas Jaras1, Ona Lukoševičienė1
1Department of Applied Mechanics, Faculty of Civil Engineering, Vilnius Gediminas Technical University, 10223 Vilnius, Lithuania.
Abstract:
The article is focused on spun concrete made with different chemical admixtures under long-term exposure to aggressive salt-saturated ground water and a cyclic temperature gradient. Over a long-term experimental investigation, 64 prismatic spun concrete specimens were subjected to multicycle (75-120) processing under combined aggressive ambient conditions. Prismatic specimens were soaked in water or saline and dried at a temperature of 45-50 °C. The long-term multi-cycle effect of the temperature gradient and physical salt attack on the compressive strength, Young's modulus and durability of concrete was found to be negative. Chemical admixtures, though, improved the structure of spun concrete, thus having a significant positive effect on its physical-mechanical properties and durability.
More Related Videos
07:15A Testing Platform for Durability Studies of Polymers and Fiber-reinforced Polymer Composites under Concurrent Hygrothermo-mechanical Stimuli
Published on: December 11, 2014
10:52Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System
Published on: August 7, 2018
Related Concept Videos
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Hot Weather Concreting
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...
Cold Weather Concreting
To counteract the negative impacts of cold weather, ensuring...
Mass Concreting
To reduce the risk of such cracking, the concrete mix may incorporate low-heat cement and pozzolans to reduce the temperature rise. Pre-cooled angular aggregates and water-reducing admixtures...
Effects of Air-entrainment in Concrete
Design Example: Managing Concrete Workability